The iLobe is a further development of the Premium series with integrated heat exchanger. The company ipp Pump Products GmbH holds a patent for this.
The contactless running of the pumping elements of rotary lobe pumps opens up important vistas: On the one hand the perfect suitability for hygienic applications as abrasion and product contamination can be fully eliminated and on the other hand the non-wearing of the conveying elements when pumping clean liquids. These attributes result in minimum life cycle cost. The contactless running of the pumping elements is guaranteed while maintaining the full capacity.
This poses a challenge to the designing of the gearbox. The external bearing of rotary lobe pumps must enable the pump to hold the rotor almost concentric and on the axial level centric in the rotor case in nearly all operation situations.
However, the non-contact of the pumping elements is contradictory to the capacity. The gaps which are essential for the non-contact allow a return-flow of the pumped medium from the pressure side to the inlet site. This return-flow through the gap is called “slip” which becomes noticeable mainly when pumping low-viscous media and cares for a cleaning without residues of the internal components of the rotary lobe pump.
For important operating situations the characteristic slip of the centrifugal and rotary lobe pump is a most welcome side effect as the slip significantly ensures a cleaning function if all pump elements to be cleaned – from the rotor screw to the mechanical seal – are arranged in this flow path. Front loaded mechanical seals (integrated to the rotor) and plane housing covers, both are standard equipment at the iLobe, are imperative conditions for a cleaning without residues (CIP/SIP). Due to its innovative gearbox design the iLobe can run during the CIP/SIP-procedure, even with high temperature changes.
The active running of the pump during the cleaning process is imperative for an effective CIP procedure as otherwise the slip volume flow which is important for the cleaning effect, wouldn’t arise.
Non-stop availability through "front pull-out" system.
The modular structure of the PREMIUMLOBE range is of particular use regarding the sealing. All different standard gaskets are accessible from the front as "Front-Pull-Out" –system and can be exchanged by each other at any time.
The selection of the sealing principle depends on many criteria relating to the plant and the product. Tungsten Carbide is the first choice for the mechanical seals, optionally SiC/SiC. The auxiliary gaskets can be made of NBR, Viton, Viton-FDA, EPDM, EPDM-FDA, PTFE or Perflour elastomer (Kalrez).
A choice of O –ring seals and lip rings complete the range of single and double acting mechanical seals.
ipp-rotary lobe pumps can be used for any individual requirements and operation conditions: For transfer, discharge (also from high vacuum), circulation and mixing, dispensing, atomizing, tank discharge and filling. Products like for example sugar, sugar coatings, starch, mashed potatoes, lard, vitamines, glucose syrup, coffee essence, lecithin, clycerine, baby food, salads, salad dressings, spices, sauces, mixings, gelatine, chocolate, dairy products etc. are part of this field of application.
Pumping chocolate, marzipan paste, liquid sugar, fudge, jam, marmelade, honey, fruit preparations, sugar mixtures, starch or cocoa butter without affecting their quality and consistence - a challenge which we take on with a lot of experience and innovation power. The sugar contents place very high demands to the shaft seals and the temperature - ipp pumps meet all hygienic requirements and are easily cleanable, i.e. particular suited for chocolate and sweets.
ipp rotary lobe pumps are also used for processing chocolate. Our variety of rotor profiles guarantees gentle conveying even for products containing solids such as fruit, nuts, brittle or caramel.
You wish to pump dough, fats, fillings, coatings, cream, chocolat or raw products like for example glucose syrup or lecithin: ipp rotary lobe pumps are equal to this sophisticated task under hygienic conditions. Even sticky tough masses are no problem. The pumps are mechanically robust, versatilely trimmable and can be cleaned perfectly.
ipp pumps cover the complex performance range of the food industry and are also suitable for a wide range of pumped media and applications, especially in the dairy processing industry. Rotary lobe pumps are suitable for butter, yogurt and milk.
ipp pumps are particularly suitable in the milk processing industry: For cheese, cheese curd, smear cheese, cheese cream, processed cheese, cream, etc.
Dressings, sauces mayonnaise, ketchup, tomato paste, mustard, pâtés, whole eggs, egg whites, egg yolks, jams and marmalades (also with whole fruits), honey gentle conveying is a specialty of ipp Pump Products.
Gently conveying dressings, sauces mayonnaise, ketchup, tomato paste, mustard, pâtés, whole eggs, egg whites, egg yolks, jams and marmalades (also with whole fruits), honey, etc. is a specialty of ipp Pump Products.
With the products from ipp Pump Products GmbH you gently pump alcohol, beer, yeast, fruit juice, lemonades as well as mineral water, fruit juice concentrates, liquor, wine, syrup. The rotary lobe pump Premiumlobe as well as the barrel discharge pump FLB are suited for viscous media, the centrifugal pumps for the aqueous media.
With the high tech products from ipp Pump Products GmbH you can gently pump fruit juices, lemonades as well as fruit juice concentrates and smoothies. The Premiumlobe rotary lobe pump is ideal for viscous media.
The effective and at the same time gentle pumping of hygiene products is one of the strengths of ipp Pump Products GmbH. Shampoo, shower gel, soaps, lotions, disinfection and deodorants place the highest demands on positive displacement pumps.
The effective and at the same time gentle pumping of cosmetics is one of the strengths of ipp Pump Products GmbH. We develop and manufacture pumps that are precisely adapted to your requirements.
Process pumps for pharmaceuticals and precursors have to meet special requirements. GMP-compliant design is mandatory. ipp rotary lobe pumps are perfectly suited for the gentle transfer of raw materials, ointments, serums, cough syrup, vaccines, homeopathic products and plant extracts.
The pumping of vaccines, fermentations, solutions, cell cultures, blood or blood plasma places special demands on a pump in terms of hygiene and product protection and documentation. ipp rotary lobe pumps are perfectly tailored to the requirement profiles of this industry.
For transfer, discharge (also from high vacuum), circulation and mixing, dosing, atomization, tank receiving and filling, the ipp rotary lobe pumps can be selected for all individual requirements and operating conditions.
With the pumps from ipp Pump Products you can gently pump paints, lacquers, varnishes and their individual components such as fillers, binders or color pigments.
| Type | Verdräng-ungs-volumen | Verdräng-ungs-Volumen | Max. differential pressure | Max. differential pressure | Max. differential pressure | Anschluss-weite | Anschluss-weite | Weight | Weight | TCIP | TSIP | QCIP @2bar;1,8m/s |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Unit>> | [l/rev.] | [US gal/rev.] | [bar] | [psi] | [U/min] | [DN] | [Zoll] | [kg] | [lbs.] | [85...90°C] | [120...130°C] | [m3/h] |
| iL42i | 0,030 | 0,008 | 12 | 174 | 1800 | DN25 | 1 | 12 | 26 | ja | ja | 1,9 |
| iL55sx | 0,030 | 0,008 | 15 | 218 | 1400 | DN15 | 1/2 | 16 | 35 | ja | ja | 1,4 |
| iL55s | 0,040 | 0,011 | 15 | 218 | 1400 | DN20 | 3/4 | 16,5 | 36 | ja | ja | 2,1 |
| iL55i | 0,060 | 0,016 | 15 | 218 | 1400 | DN25 | 1 | 17 | 37 | ja | ja | 3,2 |
| iL55li | 0,075 | 0,020 | 15 | 218 | 1400 | DN32 | 1 1/4 | 17,5 | 39 | ja | ja | 4,4 |
| iL55l | 0,094 | 0,025 | 8 | 116 | 1400 | DN40 | 1 1/2 | 18 | 40 | ja | ja | 6,0 |
| iL63s | 0,090 | 0,024 | 15 | 218 | 1400 | DN40 | 1 1/2 | 20 | 44 | ja | ja | 3,1 |
| iL63i | 0,120 | 0,032 | 15 | 218 | 1400 | DN40 | 1 1/2 | 20 | 44 | ja | ja | 6,8 |
| iL63l | 0,174 | 0,046 | 15 | 218 | 1400 | DN40 | 1 1/2 | 21 | 46 | ja | ja | 10,6 |
| iL85s | 0,210 | 0,055 | 15 | 218 | 1100 | DN40 | 1 1/2 | 42 | 93 | ja | ja | 10,5 |
| iL85i | 0,280 | 0,074 | 15 | 218 | 1100 | DN50 | 2 | 45 | 99 | ja | ja | 14,4 |
| iL85l | 0,350 | 0,092 | 15 | 218 | 1100 | DN65 | 2 1/2 | 47 | 104 | ja | ja | 18,3 |
| iL115s | 0,550 | 0,145 | 15 | 218 | 900 | DN50 | 2 | 108 | 238 | ja | ja | 24,4 |
| iL115si | 0,700 | 0,185 | 15 | 218 | 900 | DN65 | 2 1/2 | 111 | 245 | ja | ja | 31,5 |
| iL115i | 0,950 | 0,251 | 15 | 218 | 900 | DN80 | 3 | 114 | 251 | ja | ja | 42,6 |
| iL115l | 1,230 | 0,325 | 15 | 218 | 900 | DN100 | 4 | 123 | 271 | ja | ja | 57,0 |
| iL130sx | 1,230 | 0,325 | 15 | 218 | 850 | DN65 | 2 1/2 | 190 | 419 | ja | ja | 24,7 |
| iL130s | 1,600 | 0,422 | 15 | 218 | 850 | DN80 | 3 | 201 | 443 | ja | ja | 37,1 |
| iL130i | 1,970 | 0,520 | 15 | 218 | 850 | DN100 | 4 | 212 | 467 | ja | ja | 56,5 |
| iL130l | 2,340 | 0,612 | 9 | 131 | 850 | DN100 | 4 | 222 | 489 | ja | ja | 56,5 |
The indicated data may only be evaluated individually. The simultaneous appearance of multiple performance limits may be incorrect. In practice the practicable values may vary, depending on the type of product, respectively on the design of the plant in which the pump is integrated.
The operation limits are variable. In particular Δ p max can be higher at certain applications. For a precise dimensioning a detailed examination of the operating conditions is necessary.
Ing. (FH) Walerij Stein
Development / Quality Control/ Technical Management
+49 5439 80921-0
Here you can download further information about the ipp iLobe:
CIP/SIP procedure - a challenge! Geometric aspect: Free of residues. With an EHEDG test, document no. 2, it has been proven that the ipp rotary lobe pumps are suitable for the CIP procedure without residues. During the steaming procedure (SIP) the pump doesn't need to turn, however this is necessary for the possible discharge of the condensate. „Self-Draining-Features“ (SDF) support this process. The EHEDG-certificate also includes document no. 8 which is valid for general construction and design details.
There are the following CIP procedures:
CIP-cleaning of the pump
CIP-cleaning of the pump and the system (All – In – ONE; no separate CIP pump necessary)
CIP/SIP cleaning of the centrifugal pump ensures no residue thanks to the hygienic design and O-rings with no dead space. The mechanical seal is located in the pressure equalisation flow on the back of the impeller for maximum hygiene and temperature control.
We manufacture high-tech pumps for hygienic applications. Our customers include big names from the pharmaceutical, food and cosmetics industries. ipp sets the very highest standards in product quality. This makes us the leader in technology and innovation.
